Description

End cap for beam rail (pair)

Use a beam profile when bridging cockpits or hatch covers, where an unsupported span is required. Use at least three fixing points on either side of the unsupported section – position the fixing points 100 mm apart in the supported sections.

Make sure that washers are placed under the bolt head and between the rails and the deck to ensure a good seal.

The maximum unsupported span of the beam rail is:
Size 1 = 400 mm for yachts up to 8.5 m (28 ft)
Size 2 = 700 mm for yachts up to 11.0 m (36 ft)
(Size 3 = 900 mm for yachts up to 9.75 m (32 ft))

Additional information