The Barton Bulkhead Pipe Gland BPG-50 is suitable for pipes with an external diameter of 45–50 mm (1 3/4–2 inches). The required drill bit has a diameter of 60 mm. Four M6 fasteners are included.

These glands provide a watertight and vapour-tight seal between bulkheads. They are flexible and adapt to curved surfaces and angled pipe penetrations. They are easy to install and can be fully maintained on site.

The Barton Bulkhead Pipe Gland BPG-50 is suitable for pipes with an external diameter of 45–50 mm (1 3/4–2 inches). The required drill bit has a diameter of 60 mm. Four M6 fasteners are included.

These glands provide a watertight and vapour-tight seal between bulkheads. They are flexible and adapt to curved surfaces and angled pipe penetrations. They are easy to install and can be fully maintained on site.

Vapour- and waterproof construction

Seal the opening to allow for the installation of pipes and tubes.

Suitable for sloping pipes and curved surfaces.

Sealed but fully functional and adjustable.

Stainless steel and nitrile rubber (BS2751)

Suitable for partitions up to 35 mm thick.