Description

Oddly enough, and similar to PVA, it is best in water absorption when immersed in water, wrung out and then used to dry the water surface. You would think the dry state would be best, but that does not seem to be the case. Because, like the original Water Sprite®, it is non-woven, it can be cut into different sizes without fraying. But it is not PVA. It is polyamide impregnated with polyurethane.

General information about Dragon Glide™:

Thickness: 1.20 mm
Net roll width: 1.22 M
Max. washing temperature: 60 degrees Celsius
Number of washes: 100+
Suitable surfaces: all surfaces
Dirt removal from wet glass: 98.5%
Dirt removal from dry glass: 98.5%
Can be used for dusting - leave dry for dusting
Cleaning: rinse with warm water for 10-15 seconds after each use to wash away the dirt. If very dirty, rinse until the water runs clear. For daily use, machine wash often. Rinse it first to remove excess dirt. Then wash in the washing machine. Do not use bleach (this damages the fibres) or fabric softener (this clogs the fibres). Air dry the cloth.

Additional information