Description

Pull-up Cleat incl. Drain 114X29

Sizes 4.5, 6, 8, 10 inches

• Thanks to its slim, narrow design, it can be installed in places where other flush-mounted clamps would not fit.
• There is no need to cut it out.
• Made from marine-grade stainless steel (316).
• Easy to pull up – the recess in the base ensures that the clamp can be gripped quickly and easily. 
• The domed base ensures that water runs off the ridge.

INSTALLATION

• Using a hole saw, drill two holes as indicated for each batten size.
• Secure the clamps through the holes in the deck.
• Place the external tooth retaining ring (with the smooth side facing upwards) against the deck. The sharp edges must grip the nut flange and bite into it.
• A threadlocker, such as Loctite or a similar product, ensures that the nuts do not come loose.

Additional information